Heavy Duty Face Fix System
Our Heavy Duty Face Fix system is a popular exterior tool which enables large banners to be fixed to the face of the wall, with the ability to easily install and change your banner with the use of marine grade stainless steel eye bolts and M10 rigging screws.
The system comprises four wall brackets, three banner arms, two eye bolts and two M10 rigging screws.
The arms are 60mm diameter white powder coated aluminium tube, with end caps on two poles. There is one top arm, one bottom arm, and one tensioner arm.
The four wall brackets are steel constructed with two pre-drilled 18mm diameter fixing holes. Two of the brackets are open end and two are closed end. An open and closed bracket are required at both the top and bottom of the system. The bracket plates measure 100mm wide by 305mm height, with a 75mm throw from the wall.
In a standard configuration of three arms and four brackets, this system accommodates a maximum banner size of 2500mm wide by 2000mm height. We offer an in-house design service to create your graphic
The approximate weight of one system (excluding banner) is 30kg
